Decal Bob Marley, Jamaican singer 2
"Length" - is the longest size of the sticker
|High and narrow stickers length is the distance from the top to the bottom.|
|Low and wide stickers length is the distance from left to right.|
|Circles and squares has same all four sides, then they have the same length on all sides.|
Choose a color at the drop-down menu on the right.
If you need any other color please contact us and we will help you firstname.lastname@example.org
Reverced Sticker - This option allows you to create mirrored sticker.
If the sticker you want look to the left, selection of "Reverced" make it looking right. And vice versa.
Select "Reverced" if you want to place a sticker on the inside of the window, facing outwards.
You can use this feature if the mirrored image you like more.
If you want to place the same image on both sides of the car. Or make stickers staring at each other on one surface, then yo should buy two stickers. One "Normal (as at the photo)" and one "Reversed".
Decal Bob Marley, Jamaican singer 2.
Vinyl graphic definitions:
Your vinyl decal comes "sandwiched" in 3 pieces:
Clear transfer tape – use to hold the decal together.
Vinyl decal – the decal/sticker.
Backing paper – the paper backing that is peeled off first when installing.
step 1 - Clean area
Clean smooth surface with soapy dish detergent, wipe with clean cloth and dry thoroughly. Finally wipe surface again with rubbing alcohol. Surface temperature should be between 50 and 90 degrees Fahrenheit (between 10 and 32 degrees Celsius).
step 2 - Wipe top decal
Take a squeegee and wipe top decal several times on a hard, smooth surface to make decal adhere to clear transfer tape.
step 3 - Peel off backing paper
Peel decal away from backing paper. Decal will be stuck to clear transfer tape.
step 4 - Lay decal down
Carefully lay decal down with one end first. Use squeegee to finish laying down the rest of the decal.
step 5 - Pressing out air bubbles
Use squeegee to finish pressing out air bubbles.
step 6 - Wait
Wait 2-3 mins. before step 7.
step 7 - Peel clear transfer tape
Slowly peel clear transfer tape away from surface.
Do not wash the car for a few days after sticker application. Give the sticker adhere enough.